Contact Matthews Garage Door Pros
Serving Matthews, NC and the surrounding area.
- 11328 E Independence Blvd, Matthews, NC 28105
- (704) 270-4456
- Open 7 days · 7am–8pm
Ready for a quote? Request a quote and tell us what your door’s doing - the more detail, the faster we can help.
How to reach us
Tell us what the door is doing and roughly where you are - that is enough to know whether it is a same-visit fix or something that needs a part ordered first.
- 1
Call and tell us what it’s doing
(704) 270-4456 - describe the symptom and roughly where you are.
- 2
Or send it in writing
Use the quote request form if it’s easier than talking - same information, same day’s queue.
- 3
We diagnose on site
A technician tests the door under power and by hand before anything is quoted or replaced.
- 4
You approve the plan
You hear what failed and what it takes to fix it - the work starts only after that.
The Short Version
Call (704) 270-4456. If you get a busy signal or it's after hours, leave a message with your address and what the door is doing - or not doing - and we'll call back to get a time on the books. We're based at 11328 E Independence Blvd, Matthews, NC 28105, which puts us close to most of the neighborhoods we run calls into. We don't run an answering service that reads from a script, so it helps to be specific: "spring snapped, door won't budge" gets you a different truck load than "opener clicks but door doesn't move." If you can, note whether it's a single door or a double - that changes what parts we bring on the first trip.
What We Are Called Out For
Most of the houses we work on in Matthews and the surrounding towns - Stallings, Mint Hill, Hemby Bridge, and neighborhoods like Sardis Woods, Providence Plantation, and Idlewild South - were built between 1974 and 2006, with the bulk going up in the 1980s and 90s. That means a lot of original torsion springs and openers that are well past the point where replacement parts are still on the shelf at a supply house. We get called for broken torsion springs on double doors, openers that hum but don't lift, bent tracks from a car bumping the door, and cables that have frayed off the drum. Winters here aren't brutal, but cold snaps still stiffen grease and crack old rollers, so we see a bump in spring and cable calls when the temperature drops. We work on doors and openers - we don't do new construction framing or drywall repair around a damaged jamb, so if a wreck took out the header along with the door, expect a referral for that part of the job.
Contacting Us
Phone is the fastest way to reach us: (704) 270-4456. We're at 11328 E Independence Blvd, Matthews, NC 28105, and that location is central enough to reach Stallings and Mint Hill in a few minutes and Weddington, Wesley Chapel, or Pineville inside about twenty. If you're further out - Monroe, Harrisburg, Midland - tell us that up front so we can plan the route into the day. We don't have a live chat or a booking form on this site; it's a phone call, a description of the problem, and a scheduled visit. If the door is stuck open with a car half in the garage, say so - that's a different priority than a squeaky roller you've been meaning to deal with for a month.
Door stuck open or won’t close?
A garage door that won’t close leaves your home open. Tell us what’s happening and we’ll help you figure out the fastest way to get it secured.
Serving Matthews & nearby
Local garage door service across 39 Matthews-area neighborhoods and communities - is your street on the list?
Frequently asked
Straight answers about garage door repair in Matthews. Still unsure? Ask us directly.
Do you work on doors from the older part of Matthews with original 1970s or 80s hardware?
Yes. A good share of the homes in the service area date to the 1980s and 90s, with some going back to 1974, so original torsion springs and older chain-drive openers are common calls for us. We carry spring sizes and roller types matched to that era of construction.
How do you decide whether to repair or replace my door?
We look at the springs, tracks, and panels together, not just the one thing that failed. If a door built in the 1980s or 90s has a broken spring but sound tracks and panels, repair usually makes sense. If multiple systems are failing at once, we'll say so and explain why replacement is the better spend.
Do you serve neighborhoods outside Matthews proper?
We work across the area including Sardis Woods, Marshbrooke, Providence Plantation, Stonehaven, and the other named neighborhoods within roughly 3 to 6 miles of Matthews, along with nearby towns like Stallings, Mint Hill, and Hemby Bridge.
Why did my spring break with no warning?
Torsion springs are rated for a set number of open-close cycles, and most original springs from the 1980s-90s building era in this area are well past that count by now. They don't wear out gradually - they hold until the metal fatigues, then go all at once.
Ready to get your garage door sorted?
Tell us what it’s doing and where you are in Matthews - we’ll take it from there.